How to clean and maintain high and low beds? What are the materials of high and low beds?

How to clean and maintain high and low beds?

1. Try to avoid bumps during transportation to prevent surface damage and cause rust of the cabinet.

2. If it is rainy, after the rain stops, the water droplets on the surface of the metal furniture stained with water should be wiped dry in time. It is best not to place humidifiers around high and low beds and double-layer iron beds or wet clothes. At the same time, it is necessary to avoid direct sunlight outside the window illuminating the iron furniture in the room to prevent the metal from oxidizing and deteriorating, or the surface paint fading and cracking and peeling. Use dark curtains or black-blocked blinds to block the strong light directly in.

3. When placing, hold it gently, keep it horizontal, and keep a certain distance from the wall. Place the bunk bed in a place where other hard objects do not often touch, try to avoid external force collisions and injuries, and do not use hard materials to hit and knock them, as this will cause the paint layer to be shelled and the chrome-plated layer to fall off.

4. Avoid contact with acid and alkali liquids and prevent the cabinet from being corroded.

5. When there are corrosive items placed in the cabinet, avoid direct contact with the surface of the cabinet.

6. The surface of the cabinet should be kept clean. If the surface is unclean, wipe it with a detergent first, then wipe it with a dry cloth.

7. Use the correct method to unlock the lock to avoid damage to the lock body.

8. The surface dust should be removed regularly for high and low beds. It is best to use a rag of pure cotton fabric, dip it in a mild-property cleaner, and wipe it gently.

9. When opening and closing the door and drawer, open and close the doors and drawers to avoid violent impact. Do not use hard objects to hit the cabinet, and do not use sharp objects to mark the surface of the body.

Material introduction of high and low beds

The following are high and low beds of different materials:

1. Safety guardrail: 1400mm*250mm,Φ 19*1.5mm round tube, the left end of the guardrail is directly fixed to the peripheral riser to strengthen strength.

2. Bed back tube: 40mm*40mm*1.5mm square tube welded steel pipe.

3. The slab frame is made of 30mm*50mm*1.5mm square pipe welded steel pipe.

4. Escalator: Use round tube Φ 25mm*1.5mm, Φ 19mm*1.5mm round tube, specifications 260mm*1250mm, total four gears, equipped with wear-resistant plastic sleeve, fixed with strong glue.

5. Bed board: 1900mm*70mm*18mm*12 fir wood, 900mm*40mm*30mm*7 bottom gear, the bed board should be able to pass the punching test (the mass of the punching body is 25kg, the impact height is 140mm, 10 times, without loosening and deformation).

6. Iron fasteners should use spring washer, and the steel part is welded by carbon dioxide protective welding, the surface powder is electrostatically sprayed, gray-white, smoothness is more than 70%, hardness is up to 0.4, and punching force is 4N/M.

High and low bed welding parts adopt high-standard welding, with a flat and smooth surface. The bed frame is fully degreased and electrostatically sprayed, and is strictly treated with nine stations. Pure water cleaning, heating, oil removal, phosphorification, surface conditioning, and drying processes make the product have stronger anti-rust ability and longer life. The counter has a pure color, soft and extraordinary touch.